Monday, 7 August 2017

E-100 Heavy Tank - '46 'Paper Panzer' (part 6)

Due to moving house, long hours working with my business, and starting to learn Japanese, modeling has taken a back seat in daily life, however, when I do get a few minutes spare, I put in some work on my E-100 super heavy tank!

Here are a few sneak peaks of the build so far.......

Above: here is a good view of the hull.  Late-war machines would not likely have had camo on the upper surfaces due to paint shortages, however, there is some thinking behind my decision, and that is  -  if I decided to leave all or some of the side skirts off at the end of the build, I would need some colour to break up all that 'red oxide'.

Above: I am getting very close to completion.  In this photo you can see I have added some wire to the spare track links on the turret. Also, you can see the hull has been considerably 'knocked back' in colour due to the dust and grime accumulated during fighting in the city (on the news, have you seen T-72s fighting in middle eastern cities? They are very weathered and super battered!). In this photo I have done no work on the tracks as yet.

The next post will be my final reveal.

Saturday, 3 June 2017

E-100 Heavy Tank - '46 'Paper Panzer' (Part 5)

It's been a while since my last post, but I have indeed been busy with this project when time allows. I am sharing with you some 'work in progress' photos as I commence the weathering process.

Photo above: My 'steel' road wheels and weathered hull are more or less complete.
at this stage.  

Photo above: I used a mix of weathering pigments & acrylic paint for the 
weathering effects.

Photo above: the exhausts now have 'real' vertical bars inserted inside; I drilled out the molded ones and used very fine stretched sprue to make my own.  

Photo above: the turret on my model represents one fitted as a replacement at some point, but a turret that was unfinished with regards to having primer or any finishing touches, thus I opted for a rather 'raw' look which was further beaten-up by natural elements and urban combat.

Photo above: the dusting has begun!  On this model I decided to also paint and weather the underside.

Photo above: one of the schurzen that has seen some action.  If you study real ones in period photos/movie footage you'll notice just how beaten-up they got.  Just a hedgerow can scratch the paint which then proceeds to rust in the often  damp European climate, so urban fighting would certainly assure a vehicle got rough-looking pretty quickly.

Photo above: a weathered track link that hangs on the turret's side. I have the 'proper' rust pigments for this job, but for some reason have always preferred my own mix of artist pastels.

Saturday, 11 February 2017

1/35 Trumpeter's - E100 Heavy Tank (Part 4)

Hello everyone! I'm back again with some more update photos of this project. As a raw, recently-manufactured and unpainted turret on a 'red-oxide' hull was by far too much of the same tonal value/s (and not pleasing to my eyes), I  decided to use some camo to break up the colour and add some interest. 

Click on photo to magnify image

In reality, had this been a real machine I can assume only the side-skirts would have received camouflage, and maybe the front/rear hull, however, as I am planning to have some of the side-skirts missing I decided to continue the camo pattern across the upper deck.  In these photos you might notice I have started to chip the yellow and also added a pin-wash.  

Click on photo to magnify image

More soon...............

Sunday, 8 January 2017

1/35 Trumpeter's - E100 Heavy Tank (Part 3)

Being a semi-fictional subject (the hull existed while this particular turret didn't) I am not strictly tied to any particular colour scheme, so decided to paint my turret to represent a recently manufactured turret that hasn't even had its primer coat applied.

Photo above: just as I did with the hull in my previous post, I applied texture using Mr. Surfacer (click here for more info) and as there are no welds represented on this kit as supplied by Trumpeter, I made my own using putty (click here for more info).

Photo above: first I used the 'black & white technique' to create some interesting tonal contrasts under the base coat. Second came the base coat itself, and this was produced using highly diluted rusty tones which represent steel plate that has been exposed to the elements. I concentrated my darker tones in the lower turret areas and regions that would be in shadow, while the higher areas, especially the top surfaces where light would naturally fall, were significantly lightened.  The reason the paint is highly diluted is to allow the 'black & white technique' beneath to heighten the tonal effects I'm trying to create.     

Finally, I carefully airbrushed some black along my welds to represent burn marks, and then went in with some silver colored paint for the welds themselves which although may now look overly bright, will be knocked right back down with future weathering techniques.  Like I mentioned in my last post, I have learned to go really bright at this stage if I plan to weather my model - and I mean really over-exaggerate the colours - because if I don't, all my previous hard work will be more or less obliterated.

Friday, 6 January 2017

1/35 Trumpeter's - E100 Heavy Tank (Part 2)

Since my last post regarding this build I decided, somewhat late in the build I'll admit, that I wanted to try producing texture on the hull, turret, and gun mantlet to simulate the real steel of a German machine of the WWII period. This change of heart came about having been inspired by the extra armour effects created on my Super Pershing, and also by current conflicts and the improvised machines seen in recent disturbing news reports. 
Photo above: you're seeing my E-100's painted hull: I employed the 'black and white' technique to create some interesting tonal contrasts before adding a final base coat - my version of German primer (Vallejo Calvary Brown which was very heavily diluted).

Photo above: the top of the hull is the lightest area, the place where the light would be most prevalent. I have learned from past builds to over-exaggerate this method as future weathering techniques will diminish much of the garishness you see here. 

Photo above: I am very happy with the way my hull looks so far, but am undecided as to whether to add some late-war dunkelgelb - and why this indecisiveness?  Once the turret is added, depicted as unpainted steel, I feel there will be a lack of contrast. I want to create a separation between the primer painted late-war hull and its hurriedly replaced and barely completed turret, which will hopefully be very 'raw' in appearance (and in various shades of rusty brown)

Photo above
Wanting raw-looking metal plate and not having a real German tank to hand, I took to the inter-webs to study real German armour, in particular, King Tiger 'walk-arounds'.  It was very apparent that hulls and turrets were anything but smooth, so after watching some videos about replicating texture and considering my options, eventually I went the Mr. Surfacer route, using the 1000 product purely because it was all I had available. 

How to create the effect: 
1) Mask off areas you don't want textured.
2) Shake bottle well before opening.
3) Stipple Mr. Surfacer on model neat using an old brush (clean the brush using white spirit after each session and realise your brush won't be good for anything other than this type of rough usage from now on). Using Mr. Surfacer 1000 means several layers may be required, stippling until it becomes stodgy and rough; I was overly cautious and waited approx. 24 hours before adding a fresh layer - this stuff actually dries very quickly depending on temperatures in your area. 
3) Finally, you maybe left with a model coated in a horrible-looking, shiny rough texture, but don't panic! Wearing a dust mask and going outside if possible, sand with sanding sticks using varying grades and sizes where required, and suddenly you will be left with a lovely textured model. 

Remember, if you feel you have removed too much texture, don't worry as it's always possible to add more Mr. Surfacer and repeat the process mentioned above.    

How I made my weld beads
Weld beads were simulated using Perfect Plastic Putty, which was probably not ideal as it's fragile but tough enough once dried and painted - it's also all I had available. I guess it doesn't matter what filler you use and I could have even used the Mr. Surfacer.

1) Using regular masking tape I masked the areas around where I wanted my welding beads - this was a long and tedious job but worth the effort as the finished result adds a pleasing effect. 
2) I applied a small amount of filler using a cocktail stick which I then gently smoothed out.
3) The tape was delicately removed leaving behind the wet filler; this should be left until it begins to slightly harden but being impatient, I waited only a minute or two before going in with a miniature flat-head screwdriver to make little indents to replicate welding. 
4) If I went wrong, and I did, it was easy to remove my putty and start again.

While it might not be 100% authentic, the above method works well once painted and is a good representation of real welded metal plates.